Looking at the weather predictions for the week, today is a great day to check your sump pump to verify it is working properly.
When to check your sump pump? How To Test Your Sump Pump?
When to replace it?
When to check it? Sump pumps remove water pressure from homes during times of excessive snowmelt or rainfall. To ensure that your sump pump will work properly when it’s needed, you should check it periodically. It is a habit in my house to check it before, and sometimes during, an extreme weather event.
When to replace it? Did you know that generally sump pump manufacturer warranty their sump pumps for 1 year, 3 year or 5 years. When is the last time you replaced your sump pump? Depending on how much your sump pump runs – you should consider these warranties a good indicator of replacement time. Just because it is still running, doesn’t mean it is functioning at full capacity.
How to test your sump pump? The following tips will help prevent sump pump malfunction:
- Debris in the Basin: Sometimes debris such as children’s toys and other household objects may fall into the basin and interrupt the float mechanism which can cause it to malfunction. The float mechanism can also fail naturally over time. To test this mechanism, fill up the basin with water to make sure the sump pump starts like it should.
- Check Valve: The check valve prevents water from going back into the sump pump in the event of a failure. Make sure to check this valve because it is not always installed properly; the arrow should be pointing away from the sump pump.
- Weep Hole: Sometimes sump pumps may have a weep hole between the pump and the check valve. You can clean the weep hole with a tiny object such as a toothpick, just be careful not to break anything off in the hole.
- Clean the Impeller: The impeller is a small filter that may become clogged and when this happens it can cause the sump pump to suddenly stop running or make a whining noise. Cleaning or replacing the impeller can get the sump pump to function properly again.
- Back Up Power Source: Sump pumps are only useful when plugged into a power source and if the power goes out during a thunderstorm, the sump pump will stop working. Installing a backup power source for the sump pump is the best way to prevent this from happening in the middle of a thunderstorm when the sump pump is needed the most.